More about the GRIT Gate Control*
The GRIT Gate Control requires 12v DC power to operate. This product includes:
- Bolt-on Gate Actuator
- Gate Arm (sized for your existing metal blast gate)
- Slide Bracket (used to attach Gate Arm to existing blast gate’s tab)
- Two (2) #10-24 x 1.25” screws and two (2) #10-24 washer nuts
- Removable low-voltage terminal (inbound 12v power)
- LED open/closed status indicator light
- 10 ft. 18/2 solid copper thermostat wire
*12v Power Bank power supply sold separately.
F.A.Q.
Do I have to replace my existing gates to install GRIT automated gate control?
No! GRIT is a retrofittable automation system. The Gate Control actuator attaches to your existing metal blast gate. If you currently use plastic blast gates, you would need to install metal blast gates for the GRIT Gate Control devices to work.
Do I have to install additional AC outlets to power GRIT Gate Control?
No! Generally, you can power most of the gates in your shop with only one outlet. The GRIT Gate Control devices are powered by low-voltage power. Gates 2.5”-8” use our 9v Power Banks. Gates 9”+ use our 24v Power Banks.
I want to automate my blast gates, but I like to manually control my dust collector. Can I still use GRIT?
Absolutely! Of course we recommend automating all of the machines in your shop, but we understand that sometimes certain tools or collectors must fall outside of your GRIT system. It’s not a problem. You can automate your blast gates without automating your dust collector.
Does the Gate Control device only work when installed horizontally?
No! The GRIT Gate Control actuators are powerful enough to operate in any orientation. If your gate is catching/binding up, we recommend taking your gate apart, sanding any burs or rough edges, and/or applying a lubricant. If your gate is not sliding smoothly with manual operation, it will not slide smoothly with our actuators. For gates 8″+, we include a Slide Guide to help keep your gate from getting our of alignment.
